Roller skate with guide rollers

A red industrial roller carriage with metal wheels and bearings is mounted on a matching I-beam rail, illustrating a linear motion system for heavy-duty applications.

Areas of application

  • For longer travel distances and/or continuous loads with additional lateral loads
  • Can be used on suitable tracks such as (crane) rails and/or beams
  • The number and arrangement of guide rollers is customised and determined by the customer.
Enquire now

Main features

  • Robust, low-maintenance welded construction to maintain the direction of travel
  • Customised to customer requirements depending on road profile
  • Minimum requirements for the roller skate model: hardened centre plate; roller material 50 CrV4 is recommended.
Roller skate with guide rollers

Instructions for use

  • For manufacturing purposes, it is essential to specify the profile or the dimension "X". The dimension "X" is the distance between the centre of the roller skate and the inner edge of the guide roller, taking into account the track clearance.

Example: When using an HEB 200 beam, the track width is 200mm.

The measurement “X” is calculated from half the track width plus a clearance of typically 5mm. In this case, “X” = 105 mm (200mm : 2 + 5mm ).

Clearance lower than 5mm are of course also possible.

  • Particularly recommended arrangements of the guide rollers:
  • If little is known about profile parallelism (beam/rail), only use one profile and select the roller skates on this profile in the FR-E arrangement.
  • For precisely laid profiles, equip the roller skates on both profiles with the FR-C arrangement.
  • If it is not possible to attach guide rollers to the side, we recommend guide rollers that are attached to the front and/or rear in line with the specified profile (see roller skates with guide rollers).
  • Modifications to the drilling pattern in the top plate on request
  • The screw head of the guide rollers on models I-III can be positioned inwards on request.
  • The large guide roller can also be selected for the Model IIIv.
  • Maximum displacement speed ≤ 5 m/min.
Technical engineering drawing of three mechanical components, showing front and side cross-sectional views with various labeled dimensions and internal parts depicted, including bolts, bearings, and structural elements.

MODEL A-H-FR, AS-H-FR-, AM-H-FR-

(H = centre plate hardened and ground),

Mod.abcØ defghkX
min		X
max		Permissible radial force
p. guide roller (kN)
I2101757660403613012816358010
II2201908760403214013516429010
III270210104604032180152165011010
IIIV320220115604032230163165511510
IV3802701451256050160195--45150100
V5303001651256050280215--50160100
VV5003501901706050340240--50170150
VI9003802001706050550250--50170150
Dimension sheet No. 12

MODEL A–H–FR–, AS–H–FR–, AM–H–FR–

(H = centre plate hardened and ground),

GrößeIIIIIIIIIVIVVVVVIGröße
Ø d1414181822222633Ø d
k140155175180220240280300k
l150150190240280410480720l

Consulting

Are you interested in our products or do you need advice?

We are here for you.

Aerial view of an industrial facility with two large white warehouse buildings, a smaller office building, parked vehicles, and surrounding greenery including trees and an open grassy area.