Model ZAS-H /
ZAM-H

Main features

robust overall construction (frame construction)
low height
fixed connection, as the load plate or cover plate can be screwed in place
most stable load acceptance and distribution
Reduced wear thanks to roller chain guide (no lateral movement of the chain, thus no damage to the bolt heads)
Model ZAS-H / ZAM-H (roller material 50CrV4) is recommended if the risk of short-term overload beyond the specified load capacity of the roller skate cannot be ruled out or is likely. From size Vv (2500/3000 kN) upwards, 50CrV4 roller material is used as standard.

All load capacity specifications refer to load-bearing steel tracks. The transport set assumes the most unfavourable moment of only two short-term load-bearing roller skates on uneven ground.
The tracks determine whether transport runs smoothly, not the load capacity of the roller skate – tiles are unsuitable, asphalt and concrete are only suitable to a limited extent; stable sheet metal plates are best (min. 10 mm).
Trouble-free transport thanks to the selection of models with larger roller diameters and oversized load capacity
Due to the low friction forces (rolling resistance between 4–7% of the load), precautions must be taken when transporting goods on inclined planes.

(H = centre plate hardened and ground),

(Roller material 50CrV4)

Size	a	b	c	Ød	e	f	g	h	Øi	k	l	Rollers under stress	Number of rollers	Maximum load kN	Weight kg
III	270	260	340	30	68	10	14	104	18	305	95	2 x 4	2 x 13	800	36.2
IIIv	320	280	360	30	68	10	18	115	18	325	120	2 x 6	2 x 17	1000	57.5
IV	380	336	440	42	76	19	19	145	22	390	150	2 x 4	2 x 13	1300	96.0
V	530	364	480	50	86	19	19	165	22	430	210	2 x 6	2 x 17	1700	175.0
VL	580	364	480	50	86	19	23	170	26	430	250	2 x 8	2 x 21	2000	207.0
Vv	650	410	560	50	100	20	28	190	26	490	240	2 x 9	2 x 23	3000	305.0
VI	900	410	590	50	100	20	38	200	33	500	360	2 x 13	2 x 31	4000	485.0
VIv	Consult factory or local distributor													< 25000

(H = centre plate hardened and ground),

(Roller material 50CrV4)

Size	a	b	c	Ød	e	f	g	h	Øi	k	l	Rollers under stress	Number of rollers	Maximum load kN	Weight kg
I	210	200	280	18	51	6	13	76	14	245	75	2 x 5	2 x 15	250	16,0
II	220	226	305	24	60	10	14	87	14	270	80	2 x 4	2 x 13	340	22,0
III	270	260	340	30	68	10	14	104	18	305	95	2 x 4	2 x 13	660	35,0
IIIv	320	280	360	30	68	10	18	115	18	325	120	2 x 6	2 x 17	840	55,5
IV	380	336	440	42	76	19	19	145	22	390	150	2 x 4	2 x 13	1060	92,5
V	530	364	480	50	86	19	19	165	22	430	210	2 x 6	2 x 17	1380	168,0
VL	580	364	480	50	86	19	23	170	26	430	250	2 x 8	2 x 21	1760	197,0
Vv	650	410	560	50	1000	20	28	190	26	490	240	2 x 9	2 x 23	2500	294,0
VI	900	410	590	50	1000	20	38	200	33	500	360	2 x 13	2 x 31	3300	432,0
VIv	Consult factory or local distributor													< 20000