Modell K, G
Modell K, G
for use in areas at risk of corrosion
for particularly quiet, floor-friendly running
with lower demands on load capacity and robustness than steel wheels
for cases of minimized electrical conductivity (plastic)
for load movement at speeds up to max. 100 m/min
Modell K, G
- for use in areas at risk of corrosion
- for particularly quiet running that is gentle on the ground
- for lower load capacity and robustness requirements than steel wheels
- for cases of minimized electrical conductivity (plastic)
- for load movement at speeds up to max. 100 m/min
Modell K, G
Modell S
Modell S
- for robust applications, e.g. on construction sites
- can be used as a machine element for load movement at speeds up to max. 100 m/min
- for higher load-bearing capacity and robustness requirements
Insensitive to chips and dust
Modell S/P
- for robust applications, e.g. on construction sites
- can be used as a machine element for load movement at speeds up to max. 100 m/min
- for higher load-bearing capacity and robustness requirements
- when a higher safety factor and insensitivity are required
Modell S/P
Series S-A(B), S-A(B)/P
Series S-A(B), S-A(B)/P
- for running on profiles (beams/rails)
- can be used as machine elements
for load movement at speeds up to max. 100 m/min - with one wheel flange (=A) or with two wheel flanges (=B)
- maximum distance between two wheel flanges x = 55 mm with standard wheel
- maximale Distanz zwischen zwei Spurkränzen x = 55 mm beim Serienrad
